Fallstudien / Industrie

Water Injection Well

Industrie · Korrosion, Biologie, Kohlenwasserstoffe
Water Injection Well
Industrie / Korrosion, Biologie, Kohlenwasserstoffe
01 / HINTERGRUND

Water Injection Well.

Aus dem ursprünglichen Projektbericht

Our customer, a medium sized oil company in Argentina, faces problems with their water injection. It was decided to carry out a test to check how Merus Rings can help to lessen their problems.

Vor der Installation
01 / Vorher
02 / WHAT IS A WATER INJECTION WELL?

What is a water injection well?

In an oilfield, when oil is pumped from a production well, the pressure in the reservoir reduces. In order to overcome this, water injection direct into the reservoir is done in order to balance the pressure. For this purpose injection wells are drilled in the oilfield to bring the water into the reservoir.

It is hardly possible to inject valuable drinking water into the reservoir. Therefore the majority of the water used for the injection, is so called produced water, which is recycled. Crude oil is a fluid, which is a mixture of hydro carbons and water. This is separated in dedicated machines. Both the oil and the water are cleaned and finaly the produced water is recycled and injected again into the formation.

In the actual case there is a water tank, supplying several injection wells with water. We choose a 3.2 km long pipeline to perform the trial. The the temperature of the water is around 50°C, the flow 47 m3/h, at a pressure of 11kg/cm2.

The Merus Ring was installed at the beginning of the 4″ (DN100) pipeline. Direct before the point of installation one incrustation coupon and one corrosion coupone was placed. Another set of coupons was placed before the injection close to the well.

Vor der Installation
Water Injection Line
02 / VorherWater Injection Line
03 / Vorher
03 / CORROSION RATE, INCRUSTATION RATE AND SRB CLEAR REDUCED

Corrosion rate, incrustation rate and SRB clear reduced

The photos show a incrustation coupon at the top and a corrosion coupon at the bottom. The coupons on the left has been placed before the Merus Ring and was effected by untreated injection water. The coupons on the right have been installed an the injection wells app. 3.2 km downstream the Merus Ring. The difference on the incrustataion coupon in between before and after is obvious. The difference at the corrosion coupon, one have to have a closer look.

All three monitored values has reduced during the 4 month trial by 75% and more. This has been the success criteria set by the customer. And of course no changes at the existing chemical dosing during the 4 month trial. We had all the time the same conditions.

This field test could show impressively how good Merus rings are. Under what difficult conditions Merus can work.

The original report of our client is available in Spanish.
01 /
The corrosion rate MPY – mils per year, also called the speed of corrosion, was reduced from 6.43 mpy before the point of installation, to 1.43 mpy in front of the well.
02 /
The deposits reduced at the incrustation coupon from 5.22% to 1.04%.
03 /
The sulfur reduction bacteria – SRB and have been not detectable anymore after 4 month.
Vor der Installation
04 / Vorher
05 / Vorher

Die Fotos dokumentieren die beschriebene Installation; die Ergebnisse entsprechen dem ursprünglichen MERUS-Bericht. Quellseite: merusonline.com/water-injection-well

Weiter entdecken

Verwandte Fallstudien

Von diesem Fall zu Ihrer Anlage

Haben Sie einen ähnlichen Prozess?

Beschreiben Sie uns Ihre Anlage und Betriebsbedingungen – wir prüfen, ob ein MERUS Ring geeignet ist.

Ihre Anwendung besprechen info@merus.de
MERUS fragen